DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for si Go to Installation for MCC Go to Installation for SCC

DEFINITY Made Easy Tools
Issue 3, December 2001



Release 9si to R10si

Upgrade software

Return to Task List

  1. Insert the 48MB, Release 10 PCMCIA card in the TN2404 (Netcon/Pkt Intf) circuit pack's slot.

  2. Type upgrade software and press Return to upgrade the system software.

    3. Do not press Return again.

  3. When the system beeps, it is prompting you to put the original translation card in the TN2404 (Netcon/Pkt Intf) circuit pack's slot.


Note: You have 2 minutes to replace the software card with the translation card. If you miss this window, the system comes up without translations. Correct this by inserting the original translation card into the TN2404 (Netcon/Pkt Intf) circuit pack's slot and use the reset system 3 command at the SAT.

High and Critical Reliability systems

  1. Repeat steps 1 through 3.

Return to Task List

DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for si Go to Installation for MCC Go to Installation for SCC
Copyright� 2001 Avaya Inc.
Send comments to MadeEasy Development Team



Always check at the Made Easy Web site for the most current information.