DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for si Go to Installation for MCC Go to Installation for SCC

DEFINITY Made Easy Tools
Issue 3, December 2001



Upgrades for R10si Made Easy

What DEFINITY System Is This?

The table below will tell you what system you have based on Processor Board, Cabinet, and some other criteria. Click the link for the system type to proceed to the correct si upgrade procedure.

If the existing Processor Board is:
AND
Then this link takes you to this si upgrade:

TN786 or TN786B

The cabinet is wall-mounted with no CPP1 board and no slot on the carrier for a CPP1 board

G3V4vs/R5vs/R6vs to R10si (On-Site)
(includes G3vs versions V1, V2, V3, or V4)

TN790 or TN790B

The cabinet is wall-mounted with no CPP1 board and no slot on the carrier label for a CPP1 board.

G3V4vs/R5vs/R6vs to R10si (On-Site)

TN786 or TN786B

plus a CPP1 Memory Card

G3iV4 to R10si (On-Site)

TN790 or TN790B

 

R5/R6/R7/R8si to R10si

TN798 or TN798B

This type of upgrade is not covered in this documentation (Upgrades Made Easy)

DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for si Go to Installation for MCC Go to Installation for SCC
Copyright� 2001 Avaya Inc.
Send comments to MadeEasy Development Team



Always check at the Made Easy Web site for the most current information.