Open/remove doors and panels [75 small upgrade]
Return to Task List
- Remove the front door from the cabinet, if desired.
- With the cable retainer in front of you and the part number visible (4B or 4C), locate the slot that is almost vertical. (This slot is adjacent to the part number.) Insert a flat-blade screwdriver with a wide blade (1/4-inch is recommended) into the slot, and twist the screwdriver. The cable retainer will snap open easily so that the cable can be removed.
- At the cabinet, disconnect the previously labeled cables associated with the carrier to be removed.
- Behind the cabinet, remove all of the back panels.
Two different types of screws hold the back panels to the cabinet. Remove the #10 screws with a screwdriver or a 1/4-inch socket. Remove the #12 screws with a screwdriver or a 5/16-inch socket.
Return to Task List
