DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for si Go to Installation for MCC Go to Installation for SCC

DEFINITY Made Easy Tools
Issue 3, December 2001



System 75 Small-Cabinet to R8si (Blowback)

Move 25-pair cables from System 75 to R8si [75 small upgrade]

Return to Task List

  1. Remove any reusable 25-pair cables from the rear of the old system.

For G3vs upgrades

Cables connecting the wall-mount G3vs and the si cabinet may be too short. If so, replace these cables with new, longer cables.

  1. Attach any reusable 25-pair cables to the needed connectors on the rear of the si cabinet.

  2. Attach any new 25-pair cables to the needed connectors on the rear of the si cabinet.

  3. Route the new cables to the MDF and attach.

Return to Task List

DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for si Go to Installation for MCC Go to Installation for SCC
Copyright� 2001 Avaya Inc.
Send comments to MadeEasy Development Team



Always check at the Made Easy Web site for the most current information.