DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for si Go to Installation for MCC Go to Installation for SCC

DEFINITY Made Easy Tools
Issue 3, December 2001



System 75 Small-Cabinet to R8si (Blowback)

Save announcements and translation [75 small upgrade]

Return to Task List

If you have restored announcements using the white translation card from an earlier release, insert the R8 white translation card now.


Note: If the customer does not have a backup white translation card, it is very important to make sure that the new software is running normally before you save the translation. After you save translation to the translation card, the card cannot be used to bring up translation if you restore the old system.

  1. Type save translation and press Enter.

    2. This takes about 10 minutes.


Note: Do not press any keyboard key until after the terminal displays the success message. For example, if you press Enter more than once after typing the command, the second Enter erases the screen and you never see the success message.

  1. If the save translation command fails, do not continue. Record the error code that appears on the screen and escalate the problem immediately.

  2. Type save announcements and press Enter.

    3. This takes about 45 minutes.

    Keep the translation media in a safe and secure place.

Return to Task List

DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for si Go to Installation for MCC Go to Installation for SCC
Copyright� 2001 Avaya Inc.
Send comments to MadeEasy Development Team



Always check at the Made Easy Web site for the most current information.