DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for R9 Go to Installation for MCC Go to Installation for SCC

DEFINITY Made Easy Tools
Issue 2, November 2000



G3i V2/3/4 to R9si (On-Site)

Save announcements and translation [G3i V2/3/4 to R9si]

Return to Task List

  1. Remove the original translation card(s) from the TN2401 NetPkt circuit pack(s). These cards are read-only in the new TN2401.

  2. Insert the new translation card(s) into the TN2401 NetPkt circuit pack(s).

  3. Type save announcements and press Enter.

    4. This takes about 45 minutes.

  4. Type save translation and press Enter.

    5. This takes about 20 minutes.


Note: Do not press any keyboard key until after the terminal displays the success message. For example, if you press Enter more than once after typing the command, the second Enter erases the screen and you never see the success message.

  1. If the save translation command fails, do not continue. Record the error code that appears on the screen and escalate the problem immediately.

    2. Keep the translation media in a safe and secure place.

Return to Task List

DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for R9 Go to Installation for MCC Go to Installation for SCC
Copyright� 2000 Avaya Inc
Send comments to MadeEasy Development Team



Always check at the Made Easy Web site for the most current information.