DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for R9 Go to Installation for MCC Go to Installation for SCC

DEFINITY Made Easy Tools
Issue 2, November 2000



G3i V2/3/4 to R9si (On-Site)

Save translation [G3i V2/3/4 to R9si]

Return to Task List


Note: To save translations on duplicated systems, the systems must be in sync or the command will fail.

For duplicated systems only, execute status system 1 before you save translations.

Verify that conditions are normal (this can take as long as 5 to 10 minutes). If the system refuses to go into a normal condition, refer to the maintenance procedures; if that fails, escalate the problem.

  1. Type save translation and press Enter.

    2. This takes about 10 minutes.


Note: Do not press any keyboard key until after the terminal displays the success message. For example, if you press Enter more than once after typing the command, the second Enter erases the screen and you never see the success message.

  1. If the save translation command fails, do not continue. Record the error code that appears on the screen and escalate the problem immediately.

    2. Keep the translation media in a safe and secure place. In case of failure, you use this translation to restore the system.

Return to Task List

DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for R9 Go to Installation for MCC Go to Installation for SCC
Copyright� 2000 Avaya Inc
Send comments to MadeEasy Development Team



Always check at the Made Easy Web site for the most current information.