DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for R9 Go to Installation for MCC Go to Installation for SCC

DEFINITY Made Easy Tools
Issue 2, November 2000



R5si/R6si/R7si/R8si to R9si

Save announcements [R9si]

Return to Task List


Note: You do not need to save announcements for systems equipped with the TN750C announcement circuit pack (which contains on-board nonvolatile memory).

Use this procedure for systems equipped with the TN750B announcement circuit pack. Saving announcements takes about 40 minutes.

  1. To determine whether the sytem has recorded announcements, type display announcements and press Enter.

    2. If no recorded announcements are listed, you do not have to save announcements.


Note: If the customer can verify that no announcements have been changed since the announcements were last saved, you do not have to save announcements. (But if there is any doubt, save announcements!)

  1. Type save announcements <port network> <carrier> <slot> and press Enter.

Return to Task List

DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for R9 Go to Installation for MCC Go to Installation for SCC
Copyright� 2000 Avaya Inc
Send comments to MadeEasy Development Team



Always check at the Made Easy Web site for the most current information.