DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for R9 Go to Installation for MCC Go to Installation for SCC

DEFINITY Made Easy Tools
Issue 2, November 2000



R5si/R6si/R7si/R8si to R9si

Remove translation card, TN790/B, TN778, TN777B or TN794 or TN794/TN2400 circuit packs [R9si]

Return to Task List


Note: If you are upgrading a duplex installation, remove and install the circuit packs for the first SPE and then repeat these steps for the second SPE.


Danger! Before inserting or removing a circuit pack from a cabinet, put on a wrist strap and attach its plug or clip to the cabinet's frame.

  1. Remove the following equipment:

  2. Store each component separately in anti-static packing material.


Note: Keep original translation card near by.

Return to Task List

DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for R9 Go to Installation for MCC Go to Installation for SCC
Copyright� 2000 Avaya Inc
Send comments to MadeEasy Development Team



Always check at the Made Easy Web site for the most current information.