You must run the following audits on the local system
to activate the AMIS Analog Networking feature parameters:
Network-Data Audit
To run an audit and activate changes:
- Log in to the INTUITY AUDIX Command
Prompt.
The system displays the AUDIX Command Prompt after you enter your login.
- At the
enter
command: prompt, type audit network-data.
The system displays the Audit
Results screen.
- Press F3 (Enter) to
execute the audit.
The system runs the audit.
When the audit is complete, the system displays the outcome of the audit
in the Results column, the cursor returns to the command line, and the
system displays the following message:
Command Successfully
Completed.
Subscriber-Data Audit
To run an audit and activate any changes made to the System-Parameters Features screen:
- Log in to the INTUITY AUDIX Command
Prompt.
The system displays the AUDIX Command Prompt after you enter your login.
- At the
enter command:
prompt, type audit subscriber-data.
The system displays the Audit
Results screen.
- Press F3 (Enter) to
execute.
The system runs the audit.
When the audit is complete, the system displays the outcome of the audit
in the Results column, the cursor returns to the command line, and the
system displays the following message:
Command Successfully
Completed.
