Installing the SCSI Interface Card

 

Damage from electrostatic discharge is possible. See Protecting Against ESD Damage for more information.

Installing a SCSI interface card in the MAP/5P provides access for external storage devices for migrations and upgrades. These devices are used to transfer data between systems.

To install the SCSI interface card:

1. Shut down the voice system.
2. Remove system power from the MAP/5P.
3. Remove the MAP/5P dress covers.
4. Remove the SCSI interface card from the reusable upgrade kit (RUK) and from the static-reducing bag. See SCSI Interface Circuit Card.
5. Remove the screw retaining the slot cover from PCI slot 1.
6. Install the SCSI interface card in PCI slot 1. See MAP/5P Internal Layout. See Installing a Circuit Card for more information.
7. Install and tighten the circuit card retaining screw.
    
   

   Note: Leave the dress cover off the system until the data transfer is verified. You can then remove the SCSI interface card and replace the dress cover.

8. Click the BACK button until you return to the procedure checklist.

http://www.avaya.com Avaya UCS Information Development