TOC Index Search

 

Installing DCIU Switch Integration Package


 

Important! If you are installing this software from a newer version of the Intuity AUDIX CD-ROM than the version that was previously used to load the system, the system may inform you of software packages that need to be updated.
If you choose to allow the system to update these packages, please discard any previous Intuity AUDIX CD-ROMs. Keep only the most current Intuity AUDIX CD-ROM.
If you choose not to update your software packages, keep all versions of your Intuity AUDIX CD-ROM.

To install the DCIU switch integration package:

  1. Login as craft.
  2. Back-up the system.
  3. Insert the Intuity AUDIX CD-ROM in the CD-ROM drive.
  4. Start at the Avaya Intuity Main Menu and select:

    5. Software Management
    	Software Installation
    		CD

    The system displays the Software Install Screen, Page 1.
     

    Note: If you did not complete the backup, the system displays the Backup Warning Screen.

  5. Press the DOWN ARROW key until the cursor highlights the following entry in the Switch Integrations Group:

    6. [ ] DCIUset 3.2-7 -- INTUITY Platform DCIU set (V2)
     

    Note: You may need to advance several screens.

  6. Press ENTER.

    7. The system displays the line in the following manner:

    [X] DCIUset 3.2-7 -- INTUITY Platform DCIU set (V2)


     


    If you are installing multiple software packages, select all of them before proceeding to Step 8. Loading the packages one at a time will require several system reboots. This will extend the amount of time the voice system will be out of service.


     

    Note: You can only install one switch integration package on the system.

  7. Mark the appropriate entries for additional packages, by highlighting them and pressing the ENTER key.
  8. Press the down arrow until the cursor highlights the following message:

    9. Install selected packages
     

    Note: You will scroll through several screens.

  9. Press ENTER.

    10. The system displays the Software Install Confirmation.

  10. Make sure that the cursor is on PROCEED.
  11. Press ENTER.

    12. The system installs the package then displays the following message:

    Do you have more media from which to install more software?

  12. Enter n

    13. The system displays the following message:

    Do you have hardware to install?

  13. Enter n

    14. The system automatically reboots.

Avaya Communication
http://www.avaya.com
Avaya UCS Information Development
TOC Index Search