![]() |
![]() |
![]() |
Installing the Serial-Inband Package
To install the serial-inband package:
- Login to the system as craft.
- Back-up the system.
- Insert the Intuity AUDIX CD-ROM in the CD-ROM drive.
- Start at the Avaya Intuity Main Menu and select:
Software Management
Software Installation
CDThe system displays the Software Install Screen, Page 1.
Note: If you did not complete the backup, the system displays the Backup Warning Screen.
- Press the DOWN ARROW key until the cursor highlights the following entry in the
Switch Integrations Group
:
[ ] SWINset 3.2-7 -- Serial-Inband Integration Set
- Press ENTER.
The system displays the line in the following manner:
[X] SWINset 3.2-7 -- Serial-Inband Integration Set
If you are installing multiple software packages, select all of them before proceeding to Step 8. Loading the packages one at a time will require several system reboots. This will extend the amount of time the voice system will be out of service.
Note: You can only install one switch integration package on the system.
- Mark the appropriate entries for additional packages, by highlighting them and pressing the ENTER key.
- Press the down arrow until the cursor highlights the following message:
- Press ENTER
The system displays the Software Install Confirmation.
- Make sure that the cursor is on
PROCEED
.- Press ENTER.
The system installs the package then displays the following message:
Do you have more media from which to install more software?
- Enter n
The system displays the following message:
Do you have hardware to install?
- Enter n
![]() http://www.avaya.com Avaya UCS Information Development |
![]() |
![]() |
![]() |