The following table lists the procedures for adding a new Aria
Digital remote machine to the Message Networking system. The procedures appear
in the sequence in which they are performed.
| Completed |
Task |
| |
Obtain the completed planning worksheet for the remote machine.
You will use the information from this worksheet when you configure
the remote machine parameters for the new Aria machine. |
| |
Obtain the Dial Plan Mapping requirements for the remote machine
from your account representative. You will use these requirements
to determine how to map the new system's dial plan. |
| |
Determine the type of subscriber update to use for the new
system (Full, Dynamic, or Directory View). You will select the
subscriber update type when you add the remote machine to the
Message Networking system. |
| |
On the Aria system, check the Feature Options and Release
Number fields on the Display Software Features Installed screen. |
| |
Verify that the Aria system is enabled for digital networking.
Check the IP Address and Net Mask Configuration and the TCP/IP
Parameter Configuration screens on the Aria system. |
| |
Verify the Octel Analog Serial Number on the General
Parameters page on the Message Networking system to ensure you enter
the correct serial number for the Message Networking system on the Aria system. |
| |
Administer the Message Networking system as an Aria Octel
Digital Networking node on the Aria remote machine. Be careful
to enter the exact name and IP address of the Message Networking
system and to deactivate analog fallback. |
| |
Ensure that the NameSend Capability is on for subscribers
in the Class of Service profile on the Aria system. |
| |
Check the Address Mapping Table for ranges of administered
extensions. |
| |
Ping the Message Networking system using the Ping command. |
| |
Administer the remote machine
parameters for the new Aria Digital remote machine. |
| |
Administer the Dial Plan Mapping
for the remote machine, using the Dial Plan Mapping requirements
you obtained. |
| |
Administer directory views, if
appropriate. |
| |
Verify that the remote machine has been added to the Message
Networking system:
|
| |
Test LAN connectivity by transmitting
test packets. |
| |
Perform a remote machine connectivity
test. |
| |
Run NameSend from the Aria system to the Message Networking
system. |
| |
Verify the NameSend update by viewing
the Subscriber List by Machine Name on the Message Networking
system. |
| |
(Optional) Run a Demand Remote
Push to the Aria system to manually update the Aria system.
|
| |
Update existing remote machines in the Message Networking network for
subscribers on the new Aria Digital system. The Adding
and updating subscribers overview provides information on
how subscribers are updated for the different types of remote
machines. |
