|
This topic provides information on performing switch administration
on the Message Networking system. The switch administration parameters
enable the Message Networking system to communicate with the switch
connected to the Message Networking system.
Important! Depending on the switch connected to the Message
Networking system, you might not be required to modify the switch
administration parameters. If the test connection you performed
after switch selection was successful, you do not need to modify
the switch administration pages. If the test connection was unsuccessful,
use the switch administration pages to specify the settings required
to connect to the installed switch.
Switch administration involves configuring the interface parameters
and call progress tones. Defaults are provided for the interface
parameters and call progress tones; however, you can modify them
if necessary for your system. If you know the information that needs
to be modified, select one of the following links and follow the
instructions to make the necessary changes:
If you do not know which parameters require modification and you
need to test the tones, complete the instructions in Capturing
call progress tones.
Important: After changing the switch administration parameters,
you must stop and start the voice system to have the changes take
effect.
Top of page
|
