Selecting the Message Networking switch connection

This topic provides information on selecting the switch connected to the Message Networking system. A switch connection is required for analog systems.

To select the switch connected to the Message Networking system:

Note: Before administering the switch connection, you must make the physical connections from the analog line interface card to the switch, install the appropriate switch software, and administer the voice system.

1. From the Administration menu, select Basic System Administration > Switch Selection.
   The system displays the Switch Selection page.
2. Select the appropriate switch and country from the drop-down list. The list varies depending on the switch software package you installed.
3. Click Save.
   The system displays a confirmation message and prompts you to stop and start the voice system.
4. Stop and start the voice system.
5. Test the switch connection by performing a test connect to an analog remote machine:
   • If the connection to the analog remote machine is successful, no further switch administration is required.
   • If the connection to the analog remote machine is unsuccessful, you must continue with performing switch administration.

Top of page