|
Field |
Valid Input |
Description |
|
Machine Name |
From 1 to 10 alphanumeric characters; can
include dashes or underscores
|
Enter a unique name for the remote machine.
|
|
|
|
All remote machine types are administered
as LDAP.
|
|
Location |
Display only |
Displays the location remote.
|
|
Voiced Name? |
y = yes
n = no |
This field contains an n until you record a name
for the machine. This field automatically changes to y when
you record a name for the machine.
|
|
Extension Length |
An integer from 3 to 10 |
Enter the length of extensions on the local system. The value you enter must match the extension length in your dial plan. |
|
Voice ID |
Display-only
|
Displays a system-assigned identifier that you must use to identify the machine if you decide to record machine names. |
|
Default Community |
An integer from 1 to 15 |
If you have administered your system to use community sending restrictions, enter the default community number for your subscriber population. |
|
Prefix |
From 0 to 21 alphanumeric characters
|
Enter the prefix digits. A user enters the prefix
before the remote subscriber's extension when addressing voice
messages. To simplify this task, use a short, descriptive prefix.
The total length of the prefix plus the extension must not exceed
24 characters. The system uses the prefix only to identify subscribers.
It is not used for dialing out, so it does not need to match an
area code or office code. The following are examples of possible
prefixes:
- No prefix. The prefix is required
only when one or more of the remote subscribers share the
same extension numbers as the local subscribers (the extension
ranges of the two systems overlap). If there are no overlapping
extension numbers, a prefix is not needed.
- Public network access code. When
addressing a message to a remote subscriber, the local subscriber
enters the remote subscriber's number as if placing a call
to that subscriber.
- Location code. This method simplifies
addressing messages by requiring only an alphanumeric code
in front of the extension number. Location codes are shorter
and often easier to remember.
|
|
Start Ext. |
A 3-digit to a 10-digit string
|
Enter the starting extensions for the ranges of telephone numbers used on the local system. (Designate a block of switch extensions that can be used at the local system when assigning subscribers.)
For example, if your system uses extensions between
2000 and 3000, enter 2000 in the Start
Ext. field.
Up to 10 different ranges can be specified
to pinpoint the exact set of extension blocks used by the local
system. The length of the start and end extension must agree with
the Extension Length field. For a 5-digit extension,
the default is from 00000 to 99999.
|
|
End Ext. |
A 3-digit to 10-digit string |
Enter the ending extensions for the ranges
of telephone numbers used on the local system.
For example, if your system uses extensions
between 2000 and 3000, enter 3000 in the End Ext.
field. |
|
Warnings |
Display-only
|
This field displays a warning when a duplication or overlap of an extension range for another machine is being assigned. |
