Restoring power to the system

To restore power to the system:

1. For a rack-mounted unit: Reattach any cables you might have unplugged from the back of the machine.
   
2. Plug the AC power cord back into the machine's power outlet as follows:
   • The following machines use a single AC cord. See:
   • MSS standard configuration (back view)
   • Messaging Application Server (back view)
   • The MSS-H has an AC cord for each power supply.
   1. Plug the AC cord into each power supply. See MSS high-availability configuration (back view).
   2. Push the rocker switch on each power supply to turn on the power.
3. Press the power button on the front of the machine.

   The green power lamp on the front of the machine should be lit.

4. On the MAS: When the reboot completes, log in, then check that all installed Modular Messaging services are started. These services all begin with the abbreviation MM. To check or restart messaging services:
   1. Double-click the Monitor icon on the desktop.
   2. In the Monitor window, select Services (Local) in the left-hand pane.
   3. In the right-hand pane, scroll down to the MM Messaging Application Server.
   4. Check that the server's status is Started. If needed, right-click on the service and select Start.
   5. Repeat steps c and d to make sure that each additional MM service is started.
5. Continue with any verification procedures needed to return the system to service.

Top of page