VMSC - MAS - PBX Integration - Serial Settings Dialog Box

The Serial Settings dialog box allows you to configure serial line settings.


Notes: If you are using NEC-2400, Ericsson MD110, or DMID, you must also configure the serial properties for these cards. See VMSC - MAS - PBX Integration - Serial NEC/Ericsson/DMID Tab. After making these settings, you must stop and restart the MAS service for the settings to take effect. See MAS - Stopping and Restarting Modular Messaging (MM) Services.

To configure serial settings, complete the following fields:

Line Speed (Bits per Second) Enter the serial line speed in bits per second. The range is 110 through 115200, and the default is 9600.

Data Bits Select the number of data bits for the serial line. The default is 8.

Stop Bits Select the number of stop bits for the serial line. The default is 1.

Parity Select to specify the type of parity for the serial line: None, Odd (default), Even, or Space.

Flow Control Select to specify the flow control for the serial line: None, DTR/DSR, RTS/CTS, or Xon/Xoff (default).

Connector Select the serial port for the line. The default is COM1.