Avaya

Modular Messaging Help

Print | Back | Fwd | Close
Home | Search | Site Index
 Getting Started 
 Administration 
 Maintenance 
 Reference 
Home > MAS Administration > MAS Alarms

MAS Alarms

An alarm indicates a hardware, software, or environmental problem that could affect system operation.

The system displays MAS alarms in the MAS alarm logs. For information about how to access these alarm logs, see Displaying the MAS alarm logs.

How to find information about a specific alarm

The alarm descriptions and resolution procedures in this section are organized by the alarm application identifier (ID), which is the two-letter code used to identify the application or subsystem for which an alarm is being generated.

For example, the application ID for the MT ABS_PROC 1 alarm is MT. If you want to find information about the MT ABS_PROC 1 alarm, see the MT (Maintenance) Alarms information.

Notes:  
    • To display alarm and event IDs, use the command line interface and the following commands:
      • For active alarm IDs, enter displog -l act
      • For resolved alarm IDs, enter displog -l res
      • For maintenance event IDs, enter displog -l maint
    • In each of the following alarm descriptions, the “System descriptor” is the message displayed when you enter the command displog -l <option> in the command line interface.

MAS alarm information is organized as follows:

Top of page

Home | Search | Site Index | Print | Back | Fwd | Close

©2004 Avaya Inc. All rights reserved. Last modified: