DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for si Go to Installation for MCC Go to Installation for SCC

Made Easy Tool for DEFINITY Media Server Configurations
Issue 5, October 2002



Install and Connect SCC1 (Single-Carrier Cabinets)

Ground DC-Powered Cabinets

Return to Task List


Caution! System grounding shall comply with the general rules for grounding contained in Article 250 of the National Electrical Code (NEC), National Fire Protection Agency (NFPA) 70, or the applicable code at the installation site.


Note: Before connecting the cabinets to the approved ground, determine the best method of grounding. See Approved Grounds for more information. Also, locate the approved ground as close to the cabinets as possible.


Note: The ground plates and cabinet clips are installed later in this procedure.

Task List: Connect the cabinet grounds on the J58890R DC Power Cabinet and the Single-Carrier Cabinets

  1. Connect DC Power Cabinet Ground

  2. Connect DC Power Distribution Unit Ground

  3. Connect Single-Carrier Cabinet Ground

DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for si Go to Installation for MCC Go to Installation for SCC
Copyright� 2002 Avaya Inc.
Send comments to MadeEasy Development Team



Always check at the Made Easy Web site for the most current information.