I need to upgrade phones to open sip:-
The Model Number
1- K175
2- J159
3- J129
I need to upgrade phones and work on any system
The Model Number
1- K175
2- J159
3- J129
I need to upgrade phones and work on any system
#################### OPENSIP ENVIRONMENT SETTINGS #################### ## ## ENABLE_3PCC_ENVIRONMENT specifies whether the deployment environment is third party SIP Server ## Value Operation ## 0 Not OpenSIP environment ## 1 3PCC/OpenSIP environment (Default) ## Note: This parameter should be set to '0' for Aura environment and IP Office ## This parameter is supported by: ## Avaya Vantage Devices SIP R2.0.1.0 and later; the default is 0. ## Avaya Vantage Connect Application SIP R2.0.1.0 and later; the default is 0. ## J129 SIP R1.1.0.0, J100 SIP R2.0.0.0 and later, J139 SIP R3.0.0.0 and later, J159 SIP R4.0.3.0 and later, J189 SIP R4.0.6.1 and later ## SET ENABLE_3PCC_ENVIRONMENT 0 ## ## 3PCC_SERVER_MODE specifies if the phone expects a generic OpenSIP server or a BroadSoft server (applicable when ENABLE_3PCC_ENVIRONMENT is set to 1). ## Value Operation ## 0 Generic (Default) ## 1 BroadSoft ## 2 3CX ## 3 Netsapiens ## 4 RingCentral (no J129) ## 5 Avaya Cloud Office (ACO) (no J129) ## This parameter is supported by: ## J100 SIP R4.0.0.0 and later; value 2 is supported in R4.0.2.0 and later, J159 SIP R4.0.3.0 and later, values 3-5 are supported by J100 SIP R4.0.5.0 and later, J189 SIP R4.0.6.1 and later ## (J129 supports value 3 only). Value 4 is no longer supported from J100 SIP R4.0.8.0 and later - use value 5 for Avaya Cloud Office and RingCentral Cloud Office. ## Avaya Vantage Devices SIP R2.0.1.0 and later, value 1 only is supported. R2.2.0.0 and later all values are supported. ## Avaya Vantage Connect Application SIP R2.0.1.0 and later, value 1 only is supported. R2.2.0.0 and later all values are supported. ## SET 3PCC_SERVER_MODE 1
Comment