open sip

[aabdulrahim]

I need to upgrade phones to open sip:-

The Model Number
1- K175
2- J159
3- J129
I need to upgrade phones and work on any system

[markgallagher]

Read the documentation at https://documentation.avaya.com. Select 'Products & Solutions | Phones and Devices | Open SIP'.

[aabdulrahim]

Read the documentation at https://documentation.avaya.com. Select 'Products & Solutions | Phones and Devices | Open SIP'.

I have phones, I need to upgrade from Avaya SIP to Open Sip

[mlombardi1]

There isn't separate firmware for OpenSIP, or 3PCC (third party call control) as Avaya calls it. Use the 46xxsettings file to enable 3PCC.

####################  OPENSIP ENVIRONMENT SETTINGS  ####################
##
## ENABLE_3PCC_ENVIRONMENT specifies whether the deployment environment is third party SIP Server 
##  Value  Operation
##   0        Not OpenSIP environment 
##   1     3PCC/OpenSIP environment (Default)
##  Note: This parameter should be set to '0' for Aura environment and IP Office
##  This parameter is supported by:
##       Avaya Vantage Devices SIP R2.0.1.0 and later; the default is 0.
##       Avaya Vantage Connect Application SIP R2.0.1.0 and later; the default is 0.
##       J129  SIP  R1.1.0.0, J100 SIP R2.0.0.0 and later, J139 SIP R3.0.0.0 and later, J159 SIP R4.0.3.0 and later, J189 SIP R4.0.6.1 and later 
## SET ENABLE_3PCC_ENVIRONMENT 0
##
## 3PCC_SERVER_MODE specifies if the phone expects a generic OpenSIP server or a BroadSoft server (applicable when ENABLE_3PCC_ENVIRONMENT is set to 1).
##  Value  Operation
##    0    Generic (Default)
##    1    BroadSoft 
##    2    3CX
##    3    Netsapiens
##    4    RingCentral (no J129)
##    5    Avaya Cloud Office (ACO) (no J129)
##  This parameter is supported by:
##       J100 SIP R4.0.0.0 and later; value 2 is supported in R4.0.2.0 and later, J159 SIP R4.0.3.0 and later, values 3-5 are supported by J100 SIP R4.0.5.0 and later, J189 SIP R4.0.6.1 and later 
##        (J129 supports value 3 only). Value 4 is no longer supported from J100 SIP R4.0.8.0 and later - use value 5 for Avaya Cloud Office and RingCentral Cloud Office. 
##       Avaya Vantage Devices SIP R2.0.1.0 and later, value 1 only is supported. R2.2.0.0 and later all values are supported. 
##       Avaya Vantage Connect Application SIP R2.0.1.0 and later, value 1 only is supported. R2.2.0.0 and later all values are supported.
## SET 3PCC_SERVER_MODE 1