VM PRO Rotary Transfer to Huntgroups

[colem116]

IP Office Server Edition 10.1 and VM PRO

I have multiple sites that are serviced by a single receptionist. Reception is not open on Saturday but the locations are.

Each location has a hunt group that rings all phones at each location.

I would like to use VM PRO to set up an automated way for site 1 gets first call into their hunt group. Next call would go to site 2 hunt group etc. Just like a rotary Huntgroup does with users.

I have tried doing this in IP Office with a huntgroup with phantom users for each location forwarding to the huntgroup for that location but that does not work. When I try it that way the call rings hangs up/drops before The caller hears a complete ring. I have checked that inhibit off-switch forward/transfer is off.

So that leaves me with trying to do this in VM PRO

Thanks for any help.

[thiel2]

In VM Pro, prior to the normal transfer to Reception, test condition for a Week Planner that has Saturday selected. If false, just to to Reception as normal, but it True, continue with some more actions.

Increment a counter, test its value, if 1 transfer to the group at site 1
If not 1, test value, if 2 transfer to the group at site 2
If not 2 (and also not 1), test value, if 3 transfer to the group at site 3
If not 3 (and also not 1 or 2) - (and at this point lets pretend you only have 4 sites), set counter back to 0 and transfer to site 4

[colem116]

Thanks you got me in the right direction!