DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for si Go to Installation for MCC Go to Installation for SCC



Verify Circuit Packs

Return to Task List

  1. Type change circuit-pack and press Enter.

  2. On the Circuit Packs - Screen 1, check the Code column to see if it says DSMAPD or MedPro.

  3. To correct it, go to the entry just above the TN802B that says DSMAPD.

  4. Type MEDPRO, and press Enter. Changing the one entry automatically changes the entry above it. If it is in IP Trunk mode, you get the following error message:

  5. MedPro type requires TN802 with application. Type MEDPRO on circuit-packs form.

  6. To complete the administration, refer to the DEFINITY ECS Administration for Network Connectivity book.

Circuit Packs - Screen 1

 change circuit-packs                                          Page   1 of   5 
                               CIRCUIT PACKS                                     
 
         Cabinet: 1                            Carrier: A
                                          Carrier Type: processor        
 
  Slot Code  Sf Mode   Name               Slot Code  Sf Mode   Name
                                           11:  MEDPRO      RESERVED-IP
 01: TN754         DIGITAL LINE            12:  MEDPRO      RESERVED-IP
 02: TN758         POOLED MODEM            13:  TN802  B      MAPD BOARD
 03: TN2144       ANALOG LINE              14: 
 04: TN746  B     ANALOG LINE              15: 
 05                                        16:         
 06: TN771  C     MAINTENANCE/TEST  
 07: TN464  F     DS1 INTERFACE     
 08: TN2140       E&M TIE TRUNK     
 09: TN767  E     DS1 INTERFACE     
 10: TN799  B     CONTROL-LAN       
 
   '#' indicates circuit pack conflict.

Return to Task List


DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for si Go to Installation for MCC Go to Installation for SCC
Copyright 2001 Avaya Inc.
Send comments to MadeEasy Development Team



Always check at the Made Easy Web site for the most current information.