DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for si Go to Installation for MCC Go to Installation for SCC

DEFINITY Made Easy Tools
Issue 3, December 2001



Install and Connect Single-Carrier Cabinets

Ground and Connect AC-Powered Cabinets

Return to Task List


Caution! System grounding shall comply with the general rules for grounding contained in Article 250 of the National Electrical Code (NEC), National Fire Protection Agency (NFPA) 70, or the applicable code at the installation site.


Note: Before connecting the cabinets to the approved ground, determine the best method of grounding. See Approved Grounds for more information. Also, locate the approved ground as close to the cabinets as possible.


Note: The ground plates and cabinet clips are installed later in this procedure.

Task List: Connect the cabinet grounds on the J58890R DC Power Cabinet and the Single-Carrier Cabinets

  1. Connect AC-Power Ground

  2. Set the Ringer Frequency

  3. Connect the Power Cord into the Power Receptacle

DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for si Go to Installation for MCC Go to Installation for SCC
Copyright� 2001 Avaya Inc.
Send comments to MadeEasy Development Team



Always check at the Made Easy Web site for the most current information.