DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for si Go to Installation for MCC Go to Installation for SCC

DEFINITY Made Easy Tools
Issue 3, December 2001



Install and Connect Single-Carrier Cabinets

Unpack and Inspect Cabinets

Return to Task List


Caution! Lifting the cabinet may require two people, as it may weigh as much as 130 pounds (60 kilograms). Use caution to avoid injury.

  1. Unpack the cabinets from the shipping material and inspect for damage.

  2. Open and remove the front door and rear panels from the cabinet.

  3. Verify the label near the circuit breaker on the power supply toward the rear of each cabinet corresponds to the local voltage type.


Danger! If the label is different than the voltage type at the site, notify your Avaya representative immediately for a replacement power supply. Do not, under any circumstances, connect an incorrect power supply o a power source.

Return to Task List

DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for si Go to Installation for MCC Go to Installation for SCC
Copyright� 2001 Avaya Inc.
Send comments to MadeEasy Development Team



Always check at the Made Easy Web site for the most current information.