DEFINITY Made Easy Tools
Issue 3, December 2001

G3iV4 to R10si (On-Site)

---

Disable scheduled maintenance and alarm origination [G3V4 to R10si]

Return to Task List

1. To prevent scheduled daily maintenance from interfering with the update or upgrade, type change system-parameters maintenance and press Enter.


2. If scheduled maintenance:


• has begun: set the Stop Time field to 1 minute after the current time.


• has not begun: set the Start Time field to at least 8 hours after the upgrade starts.

3. Type neither in the Alarm Origination to OSS Numbers field and press Enter.

Return to Task List

---

Copyright� 2001 Avaya Inc.

Send comments to MadeEasy Development Team

Always check at the Made Easy Web site for the most current information.