Configure Media Server 1���

You must configure each media server in turn. This section covers the following tasks:

• Connect and log into the S8700 media server Web Interface
• Verify Software Version
• Set media server configuration type
• Continue Server 1 configuration
• Install License and Avaya Authentication Files
• Verify Media Server 1 Connection to Customer's LAN (if provided)
• Test Media Server 1 LEDs
• Configure SNMP Traps

The following administration uses the services laptop computer and the media server Web interface. Connect the services laptop computer to the dedicated services port (default is port 2 [Eth1]) on the back of the media servers using the black crossover cable.

NOTE: Make sure you have the filled-out job aid entitled Pre-Installation Network Planning Forms--S8700 Media Server before beginning this process.

NOTE: Make sure your networking and Web browser settings are correct. Refer to the job aid entitled Pre-Installation Information--S8700 Media Server.