DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for si Go to Installation for MCC Go to Installation for SCC

DEFINITY Made Easy Tools
Issue 3, December 2001



Add IP Solutions

Installing a TN802B in Media Processor Mode

Return to Task List

To operate in MedPro mode, you must install the TN802B IP Interface and, if the system does not have one, you must also install and administer a TN799DP C-LAN circuit pack. For C-LAN administration, refer to DEFINITY Enterprise Communications Server Administration for Network Connectivity.

If you have existing TN802 IP Interface circuit packs, you can upgrade them either by replacing the circuit pack with a TN802B or by downloading the TN802B firmware onto the circuit packs (see Upgrade to TN802B (R10)).

Task list: Install the TN802B in Media Processor mode

  1. Prepare for Installation

  2. Check your shipment

  3. Connect the Cables for TN799x

  4. Connect the Cables for TN802B

  5. Connect the Modem

  6. Connect the Ethernet

  7. Install the Circuit Packs

  8. Administer the TN799x C-LAN

  9. Administer the IP Interface

  10. Test the External Connection to the LAN

DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for si Go to Installation for MCC Go to Installation for SCC
Copyright� 2001 Avaya Inc.
Send comments to MadeEasy Development Team



Always check at the Made Easy Web site for the most current information.