In addition to administering the
switch, you must administer the INTUITY AUDIX system for
LAN integration with DEFINITY� Enterprise Communications
Server (ECS). This administration includes setting the extension length
and entering the appropriate IP addresses.
This topic provides the information to start basic operation
of the INTUITY AUDIX system with the customer's switch. Once the two
have been integrated, you can perform acceptance tests for individual
system applications to ensure that they are operating properly.
| Note: Avaya is not responsible for
the installation, administration, or testing of the LAN. Customers
need to seek service as directed by their LAN administrator to resolve
problems with their LAN. |
Task Checklist
Complete the following procedures
to integrate the INTUITY AUDIX system for LAN integration with DEFINITY
ECS. Perform the following procedures in order.
INTUITY AUDIX LX
System Administration for LAN Integration with S8300 and DEFINITY ECS
Checklist
Verifying the Country-Switch
Selection
Use this procedure to check the country and switch for
the system's switch integration. The Switch Selection page determines
the defaults set in the system. If the system does not offer an exact
match, contact your local remote
center for assistance.
To verify the country and switch selection:
- Start at the Administration
main menu and select:
Basic System Administration
Switch Selection
The Switch Selection page is displayed.
- Verify that the County-Switch parameters match your location.
If they do not, contact your remote support center.
- Click Return to Main to return to the Administration main
menu.
Administer
the Switch Link
To administer the switch link:
- Start at the Administration
main menu and select:
Switch Administration
Switch Link Administration
The Switch Link
Administration page is displayed.
|
Note: The craft
and sa login can administer all fields that have not
been modified in this page.
|
Use the information listed on Worksheet
G: LAN Data for the INTUITY AUDIX System in Switch
Integration Planning.
|
Note: The Switch
Link Type, Country and Switch fields are display only.
The Switch: field can have only a value of DEFINITY
OVERLAN. If these fields do not match the information
on the Switch Selection page, re-administer the Switch Selection
page and view this page again. If they still do not match, contact
your remote support center. You might need to reload the switch
integration software.
|
- Enter an extension length of up to 7 in the Extension
Length: field. The number must match the dial plan of the switch.
See Worksheet A: Voice Port Stations on Host
Switch, in Switch Integration Planning,
to determine the extension length.
- Enter the AUDIX number. Valid entries are from
1 to 8.
- Enter the number of the switch in the Switch
Number: field.
| Note: The number for the host switch on a non-DCS
integration is usually�1. For other switches, valid switch numbers
range from 1 to 64. These numbers must match the numbers administered
on the host DEFINITY ECS. |
- Enter the IP address for the switch in the IP
Address/Host Name: field.
| Note: If you use the name instead of the IP address,
you will need to administer the TCP/IP Networking page. |
- Enter the TCP port number in the TCP Port
field. Use 5002 for the host switch. Use the port administration
on the DEFINITY for any other switches.
| Note: If you are installing the INTUITY AUDIX system
with a DCS network, continue with the procedures in this topic.
After completing these procedures, continue with DCS
Administration. The DCS Administration topic provides instructions
for administering this page for a DCS network. |
- Click Update to update the system.
The system displays a message that indicates
the switch link is being reset.
- If you want to add additional switch links, click Add. Enter
the switch link information, and then click Update.
- If you want to delete additional switch links, click Select to
Delete and then click Update.
- Determine your next step:
Provide
a DNS Server Address If You Used Names
Complete the following page if you administered
the Switch Link Administration page
using host names instead of IP addresses. If you used IP addresses,
do not administer this page.
- Start at the Administration
main menu and select:
Basic System Administration
TCP/IP Administration
Network Addressing
The Network Addressing
page is displayed.
|
Note: The craft
and sa logins can administer all fields that have not
been modified on this page.
|
Use the information on Worksheet
G: LAN Data for the INTUITY AUDIX System in Switch
Integration Planning.
- Enter the local domain name. This
is the TCP/IP domain name of the INTUITY AUDIX system. This information
is available from the customer's LAN administrator.
- Enter the DNS server IP address as provided
by the customer LAN administrator.
- Determine your next step:
Administer
the DCS Network Time Zone
Administer the time zones for the individual switches
in the DCS network if the INTUITY AUDIX system will be working in a
DCS network. See Worksheet H: Time Zones for
DCS Networks, in Switch Integration Planning,
for the information you need.
To administer the DCS network time zone:
- Start at the Administration
main menu and select:
Global Administration
Messaging Administration
The system displays the AUDIX
Command Prompt screen.
- Enter change swtich-time-zone.
The system displays the Change Switch-Time-Zone
Screen.
- See Worksheet
H: Time Zones for DCS Networks for time zone assignments. Enter
the time zone and the daylight saving values for each switch.
- When you finish, press F3 (Enter) to change the time zones.
-
Click Return to Main to return to the Administration main menu.
- Continue with Stop
and Start the Voice System.
Stop and Start the Voice System
Use the following procedures to stop and start
the (messaging software) voice system.
Stop the Voice System
To stop the (messaging software) voice system:
- See Stopping the Messaging Software (Voice
System) for procedures.
- Continue with Start
the Voice System.
Start the Voice System
To start the voice system:
- See Starting the Messaging Software (Voice
System) for procedures.
- Continue with Verify the LAN Link
Verify
the LAN Link
To verify the LAN link:
- See Diagnosing the LAN Link for procedures.
- Determine your next step:
If either the Link or the Session status is
not up, use LAN Link Troubleshooting
Procedures to locate and correct the problem.
If the Link and Session status are both up and
you have to change settings to customize the switch integration (needed
in some locations other than the US and Canada), contact your remote
support center at this time see Specific
Switch Integration Parameter Administration.
If you do not need to change the settings for
the integration and:
You do not need to administer DCS, return
to your installation information and continue with analog acceptance
testing.
You also need to administer DCS, continue
with DCS Administration.
