![]() |
![]() |
![]() |
System Installation Checklists
These installation checklists provide descriptions of the required procedures, in sequence, to use when you install an assembled, loaded, and tested (ALT) INTUITY AUDIX system.
Determine your switch type and select from the following:
- MERLIN LEGEND switch
- System 25 switch
- System 75 switch
- System 85 switch
- DEFINITY R6csi and DEFINITY Mode Code switches
- LAN Integration with DEFINITY ECS switch
Note: If you need to install a feature for the customer on an ALT system, contact your project manager to verify the requirements and contact your remote support center.
System Installation Checklist Including Switch Integration with MERLIN LEGEND, System 25, System 75, System 85, and DEFINITY R6csi and DEFINITY Mode Code Switches
The following table provides a checklist for the system installation including integration with most switches.
Table: System Installation Checklist Including Integration with MERLIN Legend, System 25, System 75, System 85, DEFINITY R6csi and Mode Code Switches Task Description Comments![]()
Prepare the site by checking the following: All systems.
All systems.
All systems.
All systems.
Verify that the switch is administered. See the switch administrator.
All systems, application dependent.
All systems.
Open boxes as instructed to reuse packing materials.
Select your system:
Assemble the system and identify key components. Select your system:
These connections must be made prior to powering up.
Restore power to the system. Select your system:
Verify that the system setup screen is correct.
Continue with the next task if the system setup screen is correct. If the system does not seem to be working, verify the hardware connections. Use the following troubleshooting procedures, as necessary:
All systems.
All systems.
All systems.
All systems.
All systems.
Assign the date, time, and time zone to the system. All systems.
Administer the system for integration with the switch. Select your switch:
All systems.
All systems.
Change the system-parameter features if the project manager has provided you with a worksheet with specific system-parameter features to change.If the customer purchased the system defaults, do not change system-parameter features and continue with the next step.
All systems.
All systems.
System Installation Checklist for LAN Integration with DEFINITY ECS
The following table provides a checklist for the system installation including LAN integration with DEFINITY ECS.
Table: System Installation Checklist Including LAN Integration with DEFINITY ECS Task Description Comments![]()
Prepare the site by checking the following: All systems.
All systems.
All systems.
All systems.
Verify that the switch has been administered. See the switch administrator.
Check if you need to notify the LAN administrator to arrange for administration of the LAN for the system.Note: Avaya is not responsible for the installation, administration, or test of communications between customer PCs and the LAN.
See the LAN administrator.Note: Some LANs may be administered prior to your arrival on site. Other LANs require that the administration for a new machine be done at the time of installation because an open connection may cause the LAN to fail.
All systems, application dependent.
All systems.
Open boxes as instructed to reuse packing materials.
Select your system:
Assemble the system and identify key components. Select your system:
These connections must be made prior to powering up.
All systems.
Restoring power to the system. Select your system:
Verify that the system setup screen is correct. All systems.
Continue with the next task if the system setup screen is correct. If the system does not seem to be working, verify the hardware connections. Use the following troubleshooting procedures, as necessary:
All systems.
All systems.
All systems.
All systems.
All systems.
Assign the date, time, and time zone to the system. All systems.
Change the system-parameter features if the project manager has provided you with a worksheet with specific system-parameter features to change.If the customer has purchased the system defaults, do not change system-parameter features and continue with the next step.
Do this only if the INTUITY AUDIX system will be working on a DCS network.
All systems.
All systems.
All systems.
All systems.
![]() http://www.avaya.com Avaya UCS Information Development |
![]() |
![]() |
![]() |