Task List to Install a New G700 (with an S8300 or Local Survivable Processor)

Task List to Install a New G700 (with an S8300 or Local Survivable Processor)

Use the following checklist to install a G700 Media Gateway with the following characteristics:

The G700 has a Local Survivable Processor or an Internal S8300 Media Server.
If the G700 has a Local Survivable Procesor, the G700 is controlled primarily by an S8700 Media Server.

Table 3. Task List to Install a New G700 (with an S8300 or Local Survivable Processor) �
Task	Subtasks (If any)
Get Planning Forms from the Project Manager
Get the Serial Number of the G700
Check That the Customer Has an FTP Server for Backing up Data
Complete the RFA and ART Processes and Download MultiVantage Update Software to Your Laptop	Complete and Download the License and Authentication Files to Your Laptop
	Run the ART Tool for the INADS IP Address NOTE: The ART process is available only to Avaya personnel. Non-Avaya personnel must contact their service support or customer care center for INADS addresses, if required.
	Download the Latest MultiVantage Update Software
Set up a laptop for an S8300 Media Server direct Ethernet connection	Review Physical Access Methods
	Check Your Version of Windows
	Change TCP/IP Properties and Network Settings (Windows 2000 and XP) or Change TCP/IP properties (Windows 95, 98, NT 4.0, and Millennium Edition [ME])
	Disable proxies in browser
Perform Environmental Verification
Perform Power Verification
Perform Grounding Verification
Unpack and Check the Order
Prepare the G700 Media Gateway	Affix Mounting Brackets to the G700 or Affix Feet on the Table-Top G700
Mount the G700 Media Gateway in the Rack
Insert the Avaya S8300 Media Server (If Necessary for Standalone Service or LSP)
Insert the Media Modules
Insert an Avaya Expansion Module
Insert an Avaya X330STK Stacking Module
Cable Multiple Units	Connect Units within a Single Stack
	Link Elements in Multiple Racks
Attach Ground Conductors	Review General Grounding Requirements and Approved Grounds
	Connect the Safety Ground
Connect AC Power	Review Power Requirements
	Test the AC Outlet
	Plug in AC Power
Review S8300 LED Indicators
Install License and Authentication Files	Connect Laptop to Services Port of S8300
	Log in to the S8300 from Your Laptop using Telnet
	Log in to the MultiVantage SAT Screens
	Log in to the S8300 Web Interface from Your Laptop
	Load License and Authentication Files (from Your Laptop)
	Install License and Authentication Files (from Your Laptop)
	Run Save Translations
Load New Software on the S8300	Determine Necessary Upgrades to the S8300
	Transfer Files from a CD or Hard Drive of Laptop
Install Software on the S8300	Set the Time and Date
	Install New Software
	Make the Upgrade Permanent
	Install MultiVantage Patch Files from Your Laptop
Configure the S8300
Provide the keys.install File (If Necessary)	Create the keys file
	Upload the keys file
	Download or copy the keys file
	Set the media server's time now
Configure the G700 Media Gateway	Connect Your Laptop to the G700 Serial Port
	Log in to the Avaya P330 (Layer 2 Switching Processor) Command Line Interface
	Determine Necessary Firmware to Install on the G700
	Assign the IP Address to the P330 Stack Processor (Layer 2 Switching Processor)
	Establish the IP Routing for the Stack
	Check the Serial Number of the G700 Media Gateway Processor
	Assign the IP Address to the G700 Media Gateway Processor
	Assign the Default IP Route to the G700 Media Gateway
	Assign IP Addresses to the VoIP Resources
Configure an X330 Expansion Module (If Necessary)
Check for IP Connections
Load New Firmware on the G700 Media Gateway	Verify That the S8300 tftpboot Directory Has the Right Firmware Versions
	Install New Firmware on the P330 Stack Processor (Layer 2 Switching Processor)
	Install New Firmware on the G700 Media Gateway Processor
	Install New Firmware on the Media Modules
	Set SNMP Traps
	Set up the Controller List for the G700 Media Gateway
	Set the LSP Transition Points
	Configure Other G700 Media Gateways (Stack Configuration)
	Configure Other G700 Media Gateways (Remote, No Stack Configuration)
Administer MultiVantage Software on the S8300 (When Primary Controller Only)	Reboot the System
	Log in to the MultiVantage SAT Screens
	Define the IP Network Region for the G700 Media Gateway
	Assign the Network Region to the S8300 Media Server
	Add Media Gateways
	Verify Changes
	Enable Announcements, If Necessary NOTE: This should only be done if the customer has specifically requested an immediate enabling of announcements.
	Save MultiVantage Translations
Administer MultiVantage Software on the S8700 (When the S8300 Is an LSP)	Assign the S8700's CLAN Node Name and IP Address NOTE: This assignment should have already been established as a part of normal S8700 installation.
	Define the IP Network Regions for the G700 Media Gateway and the S8700 CLAN Board(s) NOTE: This definition should have already been established as a part of normal S8700 installation.
	Define the IP Interfaces of the S8700 Port Network CLAN Boards NOTE: This definition should have already been established as a part of normal S8700 installation.
	Add Media Gateways
	Verify Changes
	Enable Announcements, If Necessary NOTE: This should only be done if the customer has specifically requested an immediate enabling of announcements.
	Save MultiVantage Translations
Review Considerations for IP Phones Supported by a Local Survivable Processor
Set Up SNMP Alarming on the G700	Add INADS phone numbers and Enable alarms to INADS
	Configure an SNMP Community String for Traps
	Configure the Destination for G700 SNMP Traps
Complete the Installation Process (On S8300 Primary Controller Only)	Register the system
	Back up the System